Tuesday, October 28, 2014

Baby Quilt Tutorial-Cutting It Up

Today's post is all about getting the fabric cut and ready to go!  I like to do all my cutting at one time, put the cut fabrics in their bag or tote (see Baby Quilt Tutorial-Organization) so I'm ready to sew when time allows.

My preferred method of cutting is with a rotary cutter, Omnigrid ruler and a self-healing mat.  Make sure your rotary cutter has a fresh blade so you can make precise, clean cuts.  I keep spares in my sewing cabinet (watch those coupons and save!)

I made my quilt 36x48.  It is sufficient to cover a crib (rarely ever done after baby gets here!) or to use as a floor mat or baby seat cover in cooler weather.  Both my children received quilts made by my aunt and we used them for all of the above and even as nap covers when they moved to their "big boy and big girl" beds!

I chose 3 fabrics for my quilt.  The plaid I chose to use as the "header" and "foot", the chevron as the back and decorative band, and the elephants as the feature fabric.
With the completed quilt, you see the crosswise grain goes left to right and length goes north to south.

Since fabric is 42-45" crosswise, I chose to make the crosswise grain my width. This also prevents any stretching or give in the pieces due to the weave of the fabric.  Initially I cut the whole length of the fabric and then cut to size later.  (this gives me lots of "grace" area for shifting layers later in the construction)

I then cut the length from the "length of yardage".  Since my quilt will be 48 " long, I need 1 3/8 yards.  (Again, I like "grace" so I usually get 2 yards.  Any scraps can be used later for appliqué or a scrap quilt)  Use your rotary cutter and omnigrid ruler to make a square cut by lining up the bottom of the ruler on the fold and cut at the 2 yard mark along the crosswise grain.


The next step is to cut the front pieces!   A note here in the event you chose a directional print like I did, you MUST pay attention to the print.  In my case, I made sure my cutting lines were along the design lines to prevent a "wonky" looking piece.
(Check out the above photo...look at the cutting line for my chevrons--the tip of each all the way across the width of the fabric, my plaid fabric is along the same "line" of plaid the whole length of fabric)

The "header" (plaid) = 6.5" x width of fabric (WOF)
       "footer"  (plaid)= 24"x WOF
        bands   (chevron)= 2 each of 3" x WOF
        main     (elephant)= 12.5 x WOF
        backing (mixture of plaid and chevron) 48 x WOF
         Since my quilt will be 48 " long, I need 1 3/8 yards.  (Again, I like "grace" so I usually get 2 yards)
         For this quilt, I wanted to add an extra strip of color, so I combined leftover fabric to make my 
         2 yards after sewing them together.
        4 yards of quilt binding to match ( you can make your own bias strips or purchase ready made)

 You will also need crib sized batting. There will be excess but that is the "grace" allowance I talked about earlier.  I prefer a scrimmed cotton batting.  Warm and Natural is my favorite brand, but others may be used.   It can be purchased online or at many sewing shops.

I chose to embroider an initial monogram onto my main fabric.  If you choose to embellish with any embroidery.  Do it now after centering it on your fabric pieces.

We'll sew in our next tutorial!

Cut carefully.....
Renee Galloway

PS.All tutorials, information and images are the property of Renee Galloway at Ney Ney's Nest and are intended for personal use only.  Feel free to re-blog, pin, share with attribution to Ney Ney's Nest.  For all other purposes, please contact me at reneegalloway@me.com.  Thanks!





Tuesday, October 14, 2014

Baby Quilt Tutorial-Getting Organized

Recently my daughter asked me to make a quilt for a friend expecting her 3rd baby.  After all, the 3rd baby deserves something new, right?  I was the oldest child and always got the "new" items, however, my sister ended up with the "hand-me-downs".  What about you? New or Hand me downs?

Since the recipient is a big "Roll Tide" fan,  cute elephant fabric was a key feature as well as team colors!  Check out my post using another team fabric for a cute pillowcase dress that is a quick afternoon project!

Completed quilt
First and most important is the fabric selection.  I enjoy this process...it is like shopping...so much to choose from!  Remember color and scale in this process.  You want a mixture of small, medium and large prints.  What about a solid?  Do the colors or "hues" match?  Are they complimentary? (maybe another blog post on color selection?  let me know!) What about thread?  Embellishments such as a monogram or trims like rick-rack, velvet trim, embroidery?

For this quilt, my daughter chose a small scaled plaid (of course in Alabama colors), a larger scaled gray/white chevron and the favored elephant print, which was a medium scale and the basis for all the coordinating prints.  We visited a local fabric shop, Thimbles, and acquired the plaid and elephant fabrics(Farmhouse Fabrics).  I had the chevron(RBD) in my stash.
Selected quilt fabrics (with monogram done)
Depending on the size of the project, I after I have selected my pattern, fabrics, thread and any other items I might need for the project, they all go into a rubbermaid tote or a large ziploc bag.  The zip locks come in 2 gallon or L, XXL and are very handy to keep all project contents together. Most Walmart or Target stores carry them.

 I also add all the pertinent information into my Quilting Notebook to keep all my doodles, drawings, fabric selections and measurements handy for later quilts and record keeping purposes.

Up next....cutting the fabric!

Happy Organizing!
Renee

PS.All tutorials, information and images are the property of Renee Galloway at Ney Ney's Nest and are intended for personal use only.  Feel free to re-blog, pin, share with attribution to Ney Ney's Nest.  For all other purposes, please contact me at reneegalloway@me.com.  Thanks!