Showing posts with label Pascale. Show all posts
Showing posts with label Pascale. Show all posts

Sunday, February 24, 2013

Scalloped Hem Tutorial

I recently made a custom dress from the popular Pascale pattern featuring a scalloped hem adapted by Kathy Dykstra.  Today I thought I'd share my secret for an easy scalloped hem.

Pascale Scalloped Hem

 

First, select a contrasting fabric for the scallop and coordinating bias.  I purchased my bias since it was going to be a solid color, but you can make bias tape out of fabric if desired. (a good idea for a  future blog tutorial!)

Cut out your skirt pattern pieces as required for your particular pattern.   I used the Pascale pattern but any pattern can be adapted.  I had a template for the scallop provided in Sew Beautiful  #141 with Kathy Dykstra's adaptation.

[caption id="attachment_298" align="alignleft" width="400"]All supplies for a particular project. All supplies for a particular project.[/caption]

 

 

 

 

 

 

 

 

 

A template would be easy to make with the curved edge of a dinner plate or bowl, quilting templates or from a cutting board.

Trace the scallops onto your fabric with a fabric pen.  When it comes time to cut the contrasting scallop out of the fabric, DON'T CUT THE SCALLOPS but cut straight across the top of the scallops with about an inch of extra fabric at the tips of the scallops.

[caption id="attachment_388" align="aligncenter" width="400"]Cut a straight edge on both sides of constrasting fabric Cut a straight edge on both sides of constrasting fabric[/caption]

After your skirt is constructed following your pattern directions, pin the right side of the future scallop to the wrong side of  the bottom edge of your skirt.  Sew a seam along the bottom of the skirt with a seam allowance specified by your pattern.

[caption id="attachment_389" align="aligncenter" width="400"]Sew seam on bottom of skirt attaching future scallop to skirt. Stitch along marked scallop after sewing the bottom skirt to the contrasting fabric.[/caption]

Then turn the contrasting future scallop to right side, iron seam allowance  and stitch along the marked scallop you made earlier with the fabric pen.  CAREFULLY cut off the straight edge of the contrasting fabric by following close to your newly stitched scallop.

Now it is time to add the bias tape!  I discovered fabric basting glue recently and LOVE it!  I started by securing the bias tape to a "slope" on the trimmed scallop edge with a pin.  Squeeze a small beaded line of glue along the "slope" and press the bias into place.  I also secured by sticking a pin into my ironing board while I continued to work on placing the bias.  It was dry enough to move as I worked my way around the skirt.  So much easier than pins!

[caption id="attachment_390" align="aligncenter" width="400"]Use fabric basting glue to help with the bias. Use fabric basting glue to help with the bias.[/caption]

Continue gluing and pinning. If you've never mitered a corner, don't freak out!  It's easy!  I use my seam ripper and place it at the top of the scallop point on top of the bias tape.

[caption id="attachment_415" align="aligncenter" width="400"]Use the seam ripper to help with the mitered edge. Use the seam ripper to help with the mitered edge.[/caption]

Holding the bias tape with the seam ripper, use the other hand to fold the bias tape back.

mitering 2(Note the mashed fingernail? ALWAYS turn serger off when threading....:)  After the first fold, bring the bias tape back onto itself and headed down the scallop.

[caption id="attachment_417" align="aligncenter" width="400"]Fold the bias back on itself. Fold the bias back on itself.[/caption]

Adjust the fold so the "seam" made in the bias, or the mitered corner, is straight and sitting on top of the tip of the scallop.  I use my seam ripper tip to hold the bottom in place while adjusting.

[caption id="attachment_418" align="aligncenter" width="400"]A little dab will do it! A little dab will do it![/caption]

Here's where the oh-so-wonderful basting glue comes in handy!  Put a little bead under the fold.  Pin directly into the ironing board and continue down the "valley" of the scallop.  By the time you get ready to shift the skirt it will be dry enough to move.  Don't worry about any excess glue sticking out, it dries clear and washes out!  If I tried to pin that mitered point, I'd have buckles and difficulty sewing a straight stitch .  The glue keeps everything nice and neat and makes sewing straight stitches a breeze!

[caption id="attachment_419" align="aligncenter" width="400"]A completed scallop with mitered bias trim! A completed scallop with mitered bias trim![/caption]

Finish gluing the bias and then take to machine and stitch close to each edge.  That is, a straight stitch a scant 1/8" from top edge of bias trim and a scant 1/8" from bottom edge of bias trim.  Remember to leave the needle in the fabric at the tip of the scallop, lift the pressure foot and turn the fabric to go down the slope of the next scallop.  Repeat all the way around the skirt.

[caption id="attachment_420" align="aligncenter" width="400"]I also trimmed the yoke. I also trimmed the yoke.[/caption]

I used the same technique for the yoke bottom. (In this photo the trim has been glued but not sewn.)

[caption id="attachment_421" align="aligncenter" width="400"]My completed yoke. My completed yoke.[/caption]

 

Viola!  My version of the Pascale dress.  This dress was a custom order for a very special birthday girl....

[caption id="attachment_422" align="aligncenter" width="400"]Front of Pink Pascale. Front of Pink Pascale.[/caption]

[caption id="attachment_423" align="aligncenter" width="400"]Back of Pink Pascale Back of Pink Pascale[/caption]

Hoping you try this method!

Sew Happy,

Renee

Ney Ney's Stitches

needle_and_thread

 

Monday, January 28, 2013

Perfectly Organized Patterns and Projects

Are your pattern envelopes stuffed full of multiple sized patterns?  Do you have pieces of various patterns strewn in different places?  When you want a specific pattern can you find it?  What do you do with all these bits and pieces that won't fit into that paper envelope?  I have the solution...perfectly organized patterns!

I used to stick all the sizes and original pattern envelope and instructions into a ziploc bag.  That at least kept everything in the same place, but then when I got ready to do a particular size, I had to weed through all the different pieces to find the correct size.  That was until I met Gail Doane  this past summer at Martha Pullen's School of Art Fashion.

Here is what you do:

First, you'll need paper folders with the metal duo-tangs in the center, page protectors, a label maker or marker and either masking tape or painter's tape and your pattern.

[caption id="attachment_289" align="aligncenter" width="300"] Supplies needed for pattern organization.[/caption]

I purchased purple folders because that is my favorite color and I use it as my logo and theme color for Ney Ney's Stitches.  You could use different colors to distinguish between boys patterns and girls' patterns or yoke-style patterns vs. a bishop style pattern, etc.

[caption id="attachment_292" align="aligncenter" width="300"] Labeling the folder.[/caption]

Next, create a label with your label maker or a marker and tape to represent the pattern you are filing.  Here I'm using the famous Pascale from Sew Beautiful.

[caption id="attachment_293" align="aligncenter" width="300"] Labeling the page protectors.[/caption]

The next step is to count the number of sizes the pattern provides and add one to it.  Each size will have it's own page protector and the additional protector is for the original pattern/envelope and instructions.     For my Pascale pattern, I had sizes 3, 4, 5, 6 and 7.  So I had 5 page protectors that I labeled with each size in my pattern and left one page protector blank to store the original pattern.

[caption id="attachment_294" align="aligncenter" width="300"] Filling the page protectors.[/caption]

Then put the page protectors into the folder with the blank one first and the numbered sizes in sequential order.  Slip the original pattern and instructions into the first, blank page protector.

[caption id="attachment_295" align="aligncenter" width="300"] Adding multiple sizes to the folder.[/caption]

You will be able to see the pattern information without removing the pattern from the page protector!  Then place your multiple sizes in the correct page protector.  As I work on a particular project, I trace the size I need and store it.  The organizational freak in me want to trace all of them at once but I don't allow myself to do this if I'm working on a custom order or a timeline.

I started adding a post it note tab with a label on the "open edge"  to make it easier to find in my file cabinet.  (sorry no pics of this step)  The folder either goes to the file cabinet for storage...

[caption id="attachment_297" align="aligncenter" width="199"] File cabinet for storage.[/caption]

 

or into my project boxes for production along with all the necessary supplies for that project. (yes....they are purple too!)

[caption id="attachment_298" align="alignleft" width="300"] All supplies for a particular project.[/caption]

 

[caption id="attachment_299" align="alignright" width="300"] All supplies for a project stored in my purple boxes.[/caption]

 

 

 

 

 

 

 

 

 

 

 

 

 

Thanks for reading!  Hope this helps you organize your patterns and projects!

 

Sew Happy,

Renee